Details — Below are the specifications for Arm-R-Lite's Monarch Car Wash Door model
RAILS AND STILES — To be joined by heli-arc welds in unexposed locations. Aluminum alloy 6063T-6. Door thickness 1 3/4". Bottom rail 4 1/2". Meeting rails 3 3/8" Top rail 2 3/4". End stiles 3 3/8".
FINISH— Anodized per Aluminum Association specification A-21. Clear anodized, dark bronze and baked-on white-stock colors. Custom colors available.
PANELS — .051 Anodized aluminum sheet. For insect screens, grilles, louvers or vents, consult factory.
GLAZING — Bronze tinted polycarbonate thermoglazing set in continuous vinyl channel and held in place with a rigid snap in bead.
BOTTOM WEATHER SEAL — Cold-weather rubber astragal.
SIDE WEATHER SEAL — Wool jamps - positive seal aluminum or vinyl stops. Steel jamps - vinyl perimeter seal.
TRACK — Arm-R-Lite galvanized 3" track. Powder coating system, for track hinges, is available as a rust imhibitor for this high moister environment.
HARDWARE — Stamped 14-gauge galvanized steel.
ROLLERS — Heavy-duty full ball bearing with hardened inner race.
COUNTERBALANCE — Torsion springs, cast aluminum drums, air craft cable. 100,000 cycle is standard.
LOCKING DEVICE — Interior slide bolt or cylinder lock.
WIND LOAD — All doors constructed to meet or exceed standards established under National Association of Door specification 102-1988. Consult factory for special Wind Loading needs.